TPO
Roofing
ENERGY-EFFICIENT FLAT ROOFING FOR COMMERCIAL PROPERTIES ACROSS GEORGIA, ALABAMA & TENNESSEE
- HEAT-REFLECTIVE. DURABLE. BUILT TO PERFORM.
THE FLAT ROOF SYSTEM BUILT FOR THIS CLIMATE.
If your building has a flat or low slope roof, TPO is one of the most practical systems available. It is lightweight, heat welded at the seams, and resistant to the UV exposure, ponding water, and temperature swings that flat roofs in this region deal with year round. What makes TPO particularly well suited to the Southeast is its reflective white surface. At Kross Roofing, we have been installing TPO systems for over 20 years. Installed correctly it lasts. The difference is entirely in the installation.
20+ Years Experience
Energy Efficient Roofing
Heat Welded Seams
Proudly Serving Georgia
COMPLETE TPO ROOFING SOLUTIONS
New TPO Roof Installation
We install TPO membrane systems on new commercial construction and existing buildings moving away from older roofing systems. Every installation includes proper substrate preparation, insulation, membrane installation, and fully heat-welded seams tested before sign-off.
TPO Roof Replacement
When an existing TPO system reaches the end of its service life or sustains widespread damage, we remove the old membrane, inspect and repair the deck as needed, and install a new system built to current specifications and warranty requirements.
TPO Roof Repair
Seam failures, membrane punctures, and flashing separations are the most common TPO repair issues. We locate the problem, repair it using heat-welded patches and properly sealed flashing, and test the repair before we leave the site.
TPO Seam Welding & Re-Seaming
Improperly welded or aging seams are the leading cause of TPO roof failures. We re-weld open seams and failing laps using commercial-grade heat welding equipment, restoring the membrane’s integrity without replacing the entire system unnecessarily.
TPO Flashing & Penetration Sealing
HVAC units, vents, pipe stacks, and drains are where most flat roof leaks originate. We seal and flash every penetration correctly so water has no path through the membrane around mechanical equipment or drainage components.
TPO Maintenance & Inspection Programs
Regular inspections extend the life of a TPO system and help keep warranty coverage in good standing. We check seam integrity, flashing condition, drainage performance, and membrane surface, addressing minor issues before they develop into active leaks.
WHY BUSINESSES CHOOSE Kross Roofing
Proper Heat Welding Makes the Difference
TPO seams are only as strong as the weld. We use calibrated heat-welding equipment and test every seam after installation. An undercooked weld can look fine from the surface and fail in the next rain. We do not leave that to chance.
Reflective Systems Built for the Southeast
Georgia, Alabama, and Tennessee summers put flat roofs under serious heat stress. A properly installed white TPO membrane reflects solar energy and reduces the thermal load on your building, something a dark membrane simply cannot do.
Full Documentation & Warranty Coverage
We provide manufacturer warranty paperwork and installation documentation on every TPO job. Commercial property owners and property managers need that paperwork, and we make sure you have everything in hand from day one of completion.
Our Crew Does the Work
We do not subcontract TPO installations. Our crew handles every step from deck preparation through final seam testing. That means one point of accountability and a workmanship warranty that actually means something because we stand behind our own work.
OUR PROVEN PROCESS
Roof Assessment
We inspect your existing roof or new structure, evaluate the substrate and drainage conditions, and determine the right TPO system thickness, attachment method, and insulation configuration for your building before anything moves forward.
Detailed Proposal
You receive a written proposal covering membrane specifications, insulation type, attachment method, warranty terms, and project timeline with enough detail to make a confident decision without needing to decode roofing jargon.
Installation
We install the insulation, membrane, and all flashings to manufacturer specifications. Every seam gets heat-welded and tested. Penetrations get properly sealed. Nothing gets covered up until it passes our inspection and meets the required standard.
Seam Testing & Sign-Off
We probe every seam with a seam probe tool before sign-off. Any weak spots get repaired on the spot. You receive your warranty documentation and completed project record before we leave the site.
RELATED SERVICES
EPDM Rubber Roofing
A proven single-ply system with decades of performance on flat and low-slope commercial roofs. Flexible, durable, and a strong alternative to TPO for buildings where energy reflectivity is not the primary priority.
Modified Bitumen
A multi-layer, asphalt-based system built for flat roofs that handle heavy foot traffic or severe weather exposure. Strong puncture resistance and built-in redundancy make it a practical choice for demanding commercial applications.
Commercial Roofing
Full-service commercial roofing across all system types, including TPO, EPDM, modified bitumen, and metal. Installation, repair, replacement, and ongoing maintenance are handled by one crew with one standard of work on every job.
Roof Inspections
Annual TPO inspections catch seam failures, flashing separations, and drainage issues before they develop into interior leaks and costly business disruptions. We inspect, document, and give you a clear report on where your system stands.
FREQUENTLY ASKED QUESTIONS
What is TPO roofing and is it right for my building?
TPO is a single-ply thermoplastic membrane used on flat and low-slope commercial roofs. It is a strong option for most buildings in this region because of its UV resistance, heat reflectivity, and durability in varying weather conditions.
How long does a TPO roof last?
A properly installed TPO system typically lasts 20 to 30 years depending on membrane thickness, installation quality, drainage conditions, and maintenance. Thicker membranes and well-welded seams are the biggest factors in longevity, and both are priorities on every installation we complete.
What causes TPO roofs to fail?
The most common failure point is the seams. Improperly welded or aging laps open up and let water through. Flashing failures around penetrations are the second most common issue. Both are preventable with proper installation and regular inspections.
Can TPO be installed over an existing roof?
In some cases, yes. It depends on the condition of the existing substrate, the number of membrane layers already in place, and local building code requirements. We evaluate the existing system during the assessment and tell you the right approach.
How does TPO compare to EPDM and modified bitumen?
TPO is heat-welded, white, and reflective, making it better for energy efficiency in hot climates. EPDM is known for cold-weather flexibility. Modified bitumen handles foot traffic well. Each system has strengths, and we help you choose the right one.
Do you repair TPO roofs that you didn't originally install?
Yes. We repair TPO systems regardless of who installed them. We assess the existing membrane condition, identify the source of failure, and repair it properly, whether that means re-welding a seam, patching a puncture, or resealing failing flashing.
GEORGIA, ALABAMA & TENNESSEE
Proudly Serving
Rooted in Adairsville, Georgia, we install and service TPO roofing systems for commercial properties across Georgia, Alabama, and Tennessee. From small retail buildings to large warehouse facilities, we bring the same installation standards and the same crew to every job.
Ready For A Roof That's
BUILT TO PROTECT?
Get a free TPO roof assessment and find out whether it is the right system for your building before committing to anything.
